Console Commands

Console commands are divided into 3 groups:

• Server-side - Executes in the server console or through RCON
• Client-side - Executes through the client's console
• Chat - Executes through the in-game chat

Server-side Commands

Command	Def. value	Description
metrostroi_current_limit	4000	Current limit on substation (А). Recommended to set value greater than 10000!
metrostroi_maxtrains	(?)	Changing maximum number of trains in total.
metrostroi_maxtrains_onplayer	1	Changing maximum trains per player.
metrostroi_maxwagons	2	Changing maximum number of wagons.
metrostroi_train_requirethirdrail	1	Turns the requirement of train power to be supplied through 3rd rail on or off
metrostroi_passengers_scale	50	Amount of passengers on stations. A very big amount causes lag and can crash a server!
metrostroi_voltage	750	Changing voltage of the third rail power supply.

Client-side Commands

To open the console, enable "Enable developer console" and press ~ or shift + esc.

Command	Def. value	Description
metrostroi_cabfov	75	Changes the field of view (in degrees) in the cabin
metrostroi_disablecamaccel	0	Disables "camera acceleration" on player.
metrostroi_disablehovertext	0	Disables the hover text on buttons and switches.
metrostroi_drawdebug	0	Enables the "Debug" mode for developers. If you see green squares on train, then disable the debugger.
metrostroi_drawcams	1	Enables the CCTV cameras in the 81-722. Disable if you have low FPS.
metrostroi_language	""	Changes the localization language of Metrostroi
metrostroi_rerail	No value	Puts train back on rails. Pointer must be looking on train. Not recommended to use it on corners and track switches!

Chat Commands

Command	Description
!sopen	Open a signal or assemble a route. Example: !sopen MN4-2.
!sclose	Close a signal or disassemble a route. Example: !sclose MN4-2.
!sopps	Opens an invitation signal. Example: !sopps MND.
!sclps	Closes an invitation signal. Example: !sclps MND.
!sactiv	Enable backup signals of automatic blocking system (autoblock). Example: !sactiv * - to enable all signals or !sactiv 511-512 - to enable between stations 511 and 512.
!sdeactiv	Disable backup signals of autoblock.
!station	Teleport to station. Example: !station avto or !station 108 - Teleporting to station "Автозаводская" (Avtozavodskaya).
!trains	Outputs information about the number of trains and wagons on server.