Console Commands
Материал из Metrostroi
Версия от 20:36, 13 сентября 2018; Thyristor chick (обсуждение | вклад)
| Available languages: Русский · English · 한국어 |
Console commands are divided into 3 groups:
- Server-side - executing in server console or through RCON
- Client-side - executing in client's consols
- Chat - executing in chat
Server-side commands
| Command | Def. value | Description |
|---|---|---|
| metrostroi_current_limit | 4000 | Current limit on substation (А). Recommended to set value greater than 10000! |
| metrostroi_maxtrains | (?) | Changing maximum number of trains in total. |
| metrostroi_maxtrains_onplayer | 1 | Changing maximum trains per player. |
| metrostroi_maxwagons | 2 | Changing maximum number of wagons. |
| metrostroi_train_requirethirdrail | 1 | Turning on/off necessity of third rail to power a train. |
| metrostroi_passengers_scale | 50 | Amount of passengers on stations. A very big amount causes lags and can crash a server! |
| metrostroi_voltage | 750 | Changing a voltage on third rail. |
Client-side commands
To open a console, enable "Enable developer console" and press ~ or shift + esc.
| Command | Def. value | Description |
|---|---|---|
| metrostroi_cabfov | 75 | Changing angle of view in cabin. |
| metrostroi_disablecamaccel | 0 | Disabling "camera acceleration" on player. |
| metrostroi_disablehovertext | 0 | Disabling hover text above buttons and switches. |
| metrostroi_drawdebug | 0 | Enabling "Debug" mode for developers. If you see green squares on train - disable debugger. |
| metrostroi_drawcams | 1 | Enabling cameras in 81-722. Disable if you have low FPS. |
| metrostroi_language | "" | Changing localization in Metrostroi |
| metrostroi_rerail | No value | Put train back on rails. Pointer must be looking on train. Not recommended to use it on corners and track switches! |
Chat commands
| Command | Description |
|---|---|
| !sopen | Open a signal or assemble a route. Example: !sopen MN4-2. |
| !sclose | Close a signal or disassemble a route. Example: !sclose MN4-2. |
| !sopps | Open an invitation signal. Example: !sopps MND. |
| !sclps | Close an invitation signal. Example: !sclps MND. |
| !sactiv | Enable reserve signals of automatic blocking system (autoblock). Example: !sactiv * - to enable all signals or !sactiv 511-512 - to enable between stations 511 and 512. |
| !sdeactiv | Disable reserve signals of autoblock. |
| !station | Teleport to station. Example: !station avto or !station 108 - Teleportating to station "Автозаводская" (Avtozavodskaya). |
| !trains | Outputs an information about amount of trains and wagons on server. |
