Console Commands

Материал из Metrostroi
Перейти к: навигация, поиск
Available languages: Русский · English · 한국어


Console commands are divided into 3 groups:

  • Server-side - Executes in the server console or through RCON
  • Client-side - Executes through the client's console
  • Chat - Executes through the in-game chat


Server-side Commands

Command Def. value Description
metrostroi_current_limit 4000 Current limit on substation (А).
Recommended to set value greater than 10000!
metrostroi_maxtrains (?) Changing maximum number of trains in total.
metrostroi_maxtrains_onplayer 1 Changing maximum trains per player.
metrostroi_maxwagons 2 Changing maximum number of wagons.
metrostroi_train_requirethirdrail 1 Turns the requirement of train power to be supplied through 3rd rail on or off
metrostroi_passengers_scale 50 Amount of passengers on stations.
A very big amount causes lag and can crash a server!
metrostroi_voltage 750 Changing voltage of the third rail power supply.

Client-side Commands

To open the console, enable "Enable developer console" and press ~ or shift + esc.

Command Def. value Description
metrostroi_cabfov 75 Changes the field of view (in degrees) in the cabin
metrostroi_disablecamaccel 0 Disables "camera acceleration" on player.
metrostroi_disablehovertext 0 Disables the hover text on buttons and switches.
metrostroi_drawdebug 0 Enables the "Debug" mode for developers.
If you see green squares on train, then disable the debugger.
metrostroi_drawcams 1 Enables the CCTV cameras in the 81-722.
Disable if you have low FPS.
metrostroi_language "" Changes the localization language of Metrostroi
metrostroi_rerail No value Puts train back on rails. Pointer must be looking on train.
Not recommended to use it on corners and track switches!

Chat Commands

Command Description
!sopen Open a signal or assemble a route.
Example: !sopen MN4-2.
!sclose Close a signal or disassemble a route.
Example: !sclose MN4-2.
!sopps Opens an invitation signal.
Example: !sopps MND.
!sclps Closes an invitation signal.
Example: !sclps MND.
!sactiv Enable backup signals of automatic blocking system (autoblock).
Example: !sactiv * - to enable all signals or
!sactiv 511-512 - to enable between stations 511 and 512.
!sdeactiv Disable backup signals of autoblock.
!station Teleport to station.
Example: !station avto or !station 108 - Teleporting to station "Автозаводская" (Avtozavodskaya).
!trains Outputs information about the number of trains and wagons on server.